The Phoenix I Fence Post System: How It Works.

Abbreviated description of Phoenix Fence Post Holder product and how easy it is to use.

Comprehensive description of Phoenix Fence Post Holder product from installation to post replacement.

Post Installation with the Phoenix I Post Holder (1:25)

Post Removal and Replacement (1:27)

INSTALLATION GUIDE

1. Start with the Phoenix I Post Holder
2. Insert post into Phoenix I Post Holder
3. Slide Alignment Frame over the post, push frame into Post Holder, insert shims to a snug fit
4. Install Post Holder into the ground with concrete
5. Allow concrete to cure then remove post
6. Insert post and hold vertical. Pour in dry sand around the post
7. Install locking shims
8. Finish with silicone caulking – installation is complete – your post is solid and secure! When you need to remove or replace your post, the job will be so much easier!

If you are not putting in a new fence, then chances are that you will need to remove the concrete footings for one or more fence posts. There is likely no way around the physical work to remove these footings. There are a few methods that may help and this video by Handyman Dan also explains a few of them.
Installing a new fence can seem like a daunting project. But don’t worry it can done! This video can help you get started. We highly recommend using the Phoenix I Fence Post Holder to install the fence posts of your new fence!